Goreville IL AC and Heating Experts
Charlie’s Air Conditioning & Heating has been warming and cooling Southern, IL homes and businesses for almost 40 years. We’ve been serving Goreville, IL and the surrounding areas since 1982.
Read our fantastic reviews and find out why your Southern, IL neighbors consider us to be their nearby heating and air company in Goreville, IL.
Local Reviews
for Goreville, IL
Powered by Nearby NowOur Reviews by City
Bent over by the furnace
Phyllis - Goreville, IL
I woke up hot and sticky yesterday so I called the gang down at Charlie’s. Daniel came straight over and got my apartment cooled down…….but not me! After he had been bent over by the furnace for awhile, it took a glass of lemonade to cool us both down. Daniel was there all afternoon servicing my needs and then some. He is a very thorough and thoughtful young man. I would highly recommend him to all my gals. Sincerely, Phyllis
Steve R.
Replaced primary control board, G lug was stripped out out of the box on the old one. System is heating
Steve R.
Was at house next door, walked over and told them where to get an igniter
Steve R.
Installed power bar with fuses that customer supplied, tested heat it’s working correctly
Daniel B.
2021 Fall Check Up PCSA Paid Complaint no heat. Cause of the issue was bad thermostat. Replaced thermostat and checked system operation. Everything else was clean and checked out well. System is operating normally at this time.
Shawn C.
Complaint gas furnace blowing cold air Unit running now but blower limit acting funky. Wiggled the series wires to it and got it to run. Limit most likely failing or terminals corroded. Dab collected for now model and serial in picture to check on ordering new limit
Pete F.
During System maintenance found Carbon Monoxide in flue pipe over 100 ppm. Flue CO levels were much higher than last heating check up. To rule out improper fuel/air mixture we checked flues for obstructions in flue piping and cleaned burners. CO levels were still high. CO due to cracked Heat exchanger. Furnace replacement needed.
Steve R.
PCSA 2021 RENEWAL - Heating Check Up Tested electric heat, checked all connections, tested fan, cleaned air handler, cleaned filter, vacuumed return, tested heat pump, checked charge, system is working great
Phil P.
Filled out form.
Steve R.
Unit Frozen Up Unit satisfied at 69 upon arrival very dirty filters, removed, checked charge system is cooling, tenant will get new ones
Pete F.
Quote for new system
Daniel B.
Water in floor 2021 Spring AC Check Up PCSA Cause of the issue was clogged drain line. Everything else was clean and checked out well. System is operating normally at this time.
Shawn C.
PCSA 2021 RENEWAL - AC Maintenance
Daniel B.
Unit Frozen Up 2021 Spring PCSA AC Check Up Cause of the issue was bad blower motor. Replaced blower motor. (Parts Warranty) Everything else was clean and checked out well. System is operating normally at this time.
Daniel B.
Freezing up inside Checked on systems at 201 and 203 Rawley Brooks. 201 needed new air filter and 2 lbs of R-410A. Blower motor speed may need turned up in the near future. 203 was 4 lbs low on R-410A. Both systems are working normally at this time.
Pete F.
Gave price for new LP gas furnace
Steve R.
PCSA 2021 AC Check Up Prepaid Flushed drain line, inspected electrical, cleaned filters, checked charge system is cooling
Shawn C.
2021 PCSA AC ONLY Check Up
Steve R.
No heat fixed short in w2 wire outside, took off nest thermostat and installed the old one. Tested electric heat, heat pump and ac.
Steve R.
Replaced burner throat plate
Daniel B.
Plugged filter unit running on limit . Reset ckd. Unit new filter cust. Stock
Steve R.
No heat found 2 out of 3 elements burned up, a bad limit and a bad sequencer. Need to get a new heat kit. Was able to get one element to come on, house was heating up when I left. Also replaced filter, was very dirty. Replaced heat strips, sequencer and limit run check ok
Steve R.
Rachel had found a piece of paper in the blower, it was a sticker that had pulled off motor housing. Tested heat pump and electric heat, sounds great. There were extra wire nuts in the unit put them with the baggy next to the furnace. Everything looks great
Steve R.
No heat found system cycling on dirty flame sensor. Cleaned sensor, also cleaned drains and pressure tubes, cycled furnace it’s operating fine now
Steve R.
Did heating check up there were questions about the x13. Checked unit, tested blower in heating, cooling and fan on. Sounded like the problem had been a tripped limit. Checked charge, inspected filters customer will change them
Daniel B.
Replaced 2 stack sequencer
